Hansgrohe AS25PCHHRA-NR Handleiding pagina 8

Inhoudsopgave

Advertenties

Operation

Sleep Operation

Press

button, the remote

con-troller will show

achieve to the sleep function. Press

again this

button , the sleep

function will be cancelled.

Operation Mode

1. In COOL, DRY mode

1 hour after SLEEP mode starts, temp. will become 1°C higher

than temp. setting. After another 1 hour, temp. rises by 1°C further.

The unit will run for further 6 hours then stops Temp. is higher than

temp. setting so that room temperature won't be too low for your

sleep.

SLEEP operation starts

1 hr

Temp.setting

2.In HEAT mode

1 hour after SLEEP mode starts, temp will become 2°C lower than

temp. setting. After another 1 hour, temp decrease by 2°C further.

After more another 3 hours, temp. rises by 1°C further. The unit will

run for further 3 hours then stops.Temp.is lower than temp. setting

so that room temperature won't be too high for your sleep.

Temp.setting

1 hr

SLEEP operation starts

3.In AUTO mode

The unit operators in corresponding sleep mode witch adapted to

the automatically selected operation mode.

4.In FAN mode

It has no SLEEP function.

and then

SLEEP operation stops

Approx.6hrs

Rises 1°C

1 hr

Rises 1°C

In COOL, DRY mode

Unit stop

Decreases 2°C

3 hrs

Rises 1°C

SLEEP operation stops

In HEAT mode

5.Set the wind speed change when sleeping

Set the wind speed to low if the unit will be on during sleep times.

Note：

When the TIMER ON mode is set already, the SLEEP mode

can not be set at the same time. If setting the TIMER ON mode

while the SLEEP mode is already set, the SLEEP mode will be

cancelled; TIMER OFF mode and SLEEP mode can be set at the

same time. The unit remains power on before the set off time.

TURBO/QUIET Operation

When you need rapid heating or cooling, you can choose the

Turbo function .You can use Quiet function when silence is needed

for rest or reading.

Press the

function easily. Every press,the remote controller will switch as

below：

Note

When running in Turbo, the fan speed is the highest,when running

in Quiet,the fan speed is super slow.

Unit stop

HEALTH Operation

Press

Health function will start.

Press the

cancelled.

UV sterilization function: it uses the c-band with the most effective

sterilization effect in ultraviolet radiation to remove harmful micro-

organisms such as bacteria in the air, which has remarkable

effects to make the air healthy.

Attention:

1. It is recommended to turn on the UV sterilization function for 1-2

hours in one day, longer time will affect the life of the UV lamp.

2.Do not look directly at the UV lamp or touch it with your hand

when the sterilizing function is on. Please turn off the sterilizing

function before opening the panel.

3.Tinged blue light may appear near the air conditioning inlet

when the sterilizing function is on.

4.Only when the internal fan starts and health function turned on,

the UV lamp will be lighted.

5.UVCPro modules are sterilized by ultraviolet light and glow

when working.

6.If the light emitted at night makes you uncomfortable or disturbs

your sleep, turn this feature off.

button, you can switch the "Turbo" and"Quiet"

TURBO

QUIET

button , the remote controller will show

button again and the health function will be

cancel

and the

Inhoudsopgave

Advertenties

Hoofdstukken

Inhoudsopgave

Hansgrohe AS25PCHHRA-NR Handleiding pagina 8

Hoofdstukken

Probleemoplossen

Gerelateerde Producten voor Hansgrohe AS25PCHHRA-NR

Deze handleiding is ook geschikt voor: