Hansgrohe AS25PCHHRA-NR Handleiding pagina 11

Inhoudsopgave

Advertenties

Operation

3-Level-Eco Operation

（only applicable to mono models）

The 3-Level-Eco function is an active energy-saving function,

which can be activated by pressing the ECO button on the remote

controller (

). The cycle goes as: L1→L2→L3→exit.

Press the ECO button once to enter L1 mode,

Press the ECO button again in L1 mode to enter L2 mode,

Press the ECO button again in L2 mode to enter L3 mode,

Continue to press the ECO button in L3 mode to exit this function.

After each press of the ECO button, the remote controller screen

and air conditioning panel display L1/L2/L3 respectively for five

seconds, and then return to the previous display.

The maximum energy-saving rate is 52%.

Remark:

1.The indoor unit fan speed will be adjusted according to energy

saving logic after entering the ECO function.

2.Capacity may decrease when ECO function is selected. If this

does not meet your requirement, please exit the function.

3.The energy-saving effect will be weakened when the outdoor

ambient temperature is too low or too high.

4.This function is only available for 1by1(mono) models and is

invalid for 1by2~1by5(multi) models.

5.The energy-saving rate is from laboratory comparison data

between normal running in high wind speed without the 3-Level-Eco

function selected and running with this function selected.

Inhoudsopgave

Advertenties

Hoofdstukken

Inhoudsopgave