Advertenties
Beschikbare talen
Beschikbare talen
14. Technical Specifications
Explanatory notes regarding the specifications on
page 4.
Changes due to technological progress reserved.
U
= voltage
B
= cutting width
H
= cutting height
H
= number of cutting height stages
X
V
= volume of collection bag
n
= no-load speed
m
= weight (incl. collection bag, mulching key
and smallest battery packs)
IP
= protection class
Measured values determined in conformity with EN
60335.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C.
Recommended ambient temperature when
charging: 0 °C to 40 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60335:
a
= vibration emission value
h
K
= uncertainty (vibration)
h
Typical A-weighted sound levels:
L
= sound-pressure level
pa
L
= acoustic power level
WA
K
, K
= uncertainty
pA
WA/WA(G)
L
= guaranteed acoustic power level as
WA(G)
per 2000/14/EC
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
ENGLISH en
19
Advertenties
