Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en
ENGLISH
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and
other masonry products, and
- Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
This also applies to dust from other materials such
as some timber types (like oak or beech dust),
metals, asbestos. Other known diseases are e.g.
allergic reactions, respiratory diseases. Do not let
dust enter the body.
Observe the relevant guidelines and national
regulations for your material, staff, application and
place of application (e.g. occupational health and
safety regulations, disposal).
Collect the particles generated at the source, avoid
deposits in the surrounding area.
Use suitable accessories for special work. In this
way, fewer particles enter the environment in an
uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- do not direct the escaping particles and the
exhaust air stream at yourself or nearby persons
or on dust deposits,
- use an extraction unit and/or air purifiers,
- ensure good ventilation of the workplace and keep
clean using a vacuum cleaner. Sweeping or
blowing stirs up dust.
Vacuum or wash the protective clothing. Do not
blow, beat or brush.
5. Overview
See page 2.
1 Metal cage
2 Battery pack *
3 Handle / carry handle
4 Battery pack release button
5 Clamping lever for angle adjustment
6 Hole (8 mm diameter) for fastening the lamp to
a stand
7 Screw thread (5/8"-UNC) for fastening the lamp
to a stand
8 Cut-out slot for wall suspension
9 Capacity and signal indicator *
10 Capacity indicator button *
11 Trigger switch
* depending on equipment/not in scope of delivery
10
6. Commissioning
Battery pack
Charge the battery pack (2) before use.
If performance diminishes, recharge the battery
pack.
The ideal storage temperature is between 10°C and
30°C.
Li-Ion battery packs "Li-Power" have a capacity and
signal indicator (9):
- Press the button (10), the LEDs indicate the
charge level.
- If one LED is flashing, the battery pack is almost
flat and must be recharged.
Removing and inserting the battery pack
Removal: Press the battery pack release (4) button
and pull the battery pack (2) upwards.
Inserting: Slide in the battery pack (2) until it
engages.
7. Use
Tilting metal cage (1) for flexible adjustment of the
air flow: Release the clamping lever (5), adjust to
the required angle and then secure the clamping
lever.
Insert a fully charged battery pack (2) (taking into
account the particular model).
7.1
On/Off switch, setting the speed
Avoid switching on the machine accidentally:
always switch it off when the battery pack is
removed from the machine.
Switching on, air speed adjustable in 3 levels:
press the trigger switch (11) for at least for 1 second
to switch on.
Select between 3 levels by pressing several times.
Light diodes show the level set.
Switching off: Briefly press the
trigger switch (11) (2 seconds).
8. Cleaning
Remove the battery pack (2) from the device
before carrying out cleaning.
Do not clean with aggressive cleaning agents.
In case the blades require cleaning: Ensure that the
blades will not get bent. This would result in
imbalance and vibrations. Unscrew the connecting
bolts at the outer diameter of the metal cage to
remove the front part of the metal cage. After
cleaning screw back together the metal cage with
the connecting bolts. Switch on only when the metal
cage is closed.
9. Accessories
Use only genuine Metabo accessories.
Advertenties
Inhoudsopgave
