Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
14.1 Causes and rectification of faults
Problem
Coffee brews too
slowly (more than 15
minutes) or is not hot
enough
There is coffee
grounds in the coffee
pot
Coffee has
accumulated in the
filter and coffee
grounds overflowed.
The drip-stop does not
work
Water leaks from the
bottom of the device.
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
15 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety. If these were put in the non-recyclable waste or
were handled incorrectly, they could be detrimental to human health and the environment.
Therefore, do not put your old device into the non-recyclable waste under any
circumstances.
Possible cause
Gerät ist verkalkt
Device needs to be
cleaned.
The paper filter is too
small.
Too much coffee ground is
used.
The insulated jug was not
placed on the warming
plate for too long time
during the brewing
process, so that the filter
could not empty.
Too much coffee ground is
used.
Residues of coffee at drip-
stop
Device is defective.
Please note
Possible solution
Descale the device regularly, look
at chapter descaling.
Clean the device (esepcially the
drip-stop valve).
Us the permanent filter or paper
filter in size 1x4.
Use lee coffee ground.
Unplug the mains plug.
Place the insulated jug on the
warming plate so that the filter
can empty.
Clean the device.
Use lee coffee ground.
Clean the valve (at the bottom of
the filter holder) under running
water and press carefully the drip
stop several times.
Unplug the mains plug.
Do not use the device anymore.
Contact the customer service.
35
Advertenties
Inhoudsopgave
