Advertenties
Beschikbare talen
Beschikbare talen
FOREWORD
Dear Customer,
Leica would like to thank you for purchasing the Leica SF 40
system flash unit and to congratulate you on your choice. With this
flash unit you have made the best choice for your Leica camera.
We wish you a great deal of fun and success with your new flash
unit.
Please read these instructions in their entirety so that you can
make the most of your Leica SF 40.
MEANING OF DIFFERENT INSTRUCTION CATEGORIES
Note:
Additional information
Important:
Failure to observe the instructions may cause damage to the
camera, accessories or the photos
Caution:
Failure to observe the instructions may cause personal injury
COMPATIBLE CAMERAS
The Leica SF 40 has been developed for Leica cameras that
control the flash exposure themselves. This is done on the basis of
a TTL (Through The Lens ) flash internal measurement, as with the
Leica digital cameras in the S, SL, M, T, Q and X series.
Naturally, the Leica SF 40 can also be used on other Leica models.
Manual mode is available for this.
Use of the Leica SF 40 on cameras from other manufacturers,
however, can only be recommended with reservations. For
example, contacts in the accessory shoes of other cameras that
are in a similar position but with different electrical values may
result in an incompatible connection that affects one - or even both
- of the devices. Leica Camera AG therefore excludes any further
reaching liability, in particular for damage that did not occur on the
flash unit itself.
Note:
The production date of your flash unit can be found on the stickers
in the Guarantee Card and/or on the packaging. It is written L Y M
DD XXXXXXX:
L
= Leica
Y
= Year (1-0 (=2011-2020))
M
= Month (1-9 = Jan.-Sept., A= Oct., B=Nov., C=Dec.)
DD
= Day (0-31)
XXXXXXX = firmware version
EN
25
Advertenties
