Advertenties
Beschikbare talen
Beschikbare talen
3
Installation
B
Please remember that the
manufacturer shall not be held liable
if the information given in the user
guide is not observed.
Points to be considered
when re-transporting your
refrigerator
1. Your refrigerator must be emptied and
cleaned prior to any transportation.
2. Shelves, accessories, and etc.
have to be fastened securely by
adhesive tape against any jolt before
repackaging.
3. Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
Please do not forget...
That recycled material is an
indispensable source for the nature
and for our national resources.
If you would like to contribute to the
recycling of the packaging materials,
you can get further information from
the environmental bodies or local
authorities.
Before operating your
refrigerator
Before starting to use your refrigerator
check the following:
1. The interior of the refrigerator has to
be dry and it is possible for the air
to circulate freely at the back of the
appliance.
2. a) You can install the 2 spacers
as illustrated in the figure. Spacers
will provide the required distance
between your refrigerator and the wall
in order to allow the air circulation.
(The illustrated figure is only an
example and does not match exactly
with your product.)
2. b) The condenser of your
appliance is located on the back as
shown below. In order to achieve
better energy efficiency with lower
energy consumption, please pull
the condenser towards yourself as
illustrated in picture below.
*may not be available in all models
2-b
initial position
10
EN
2-a
PULL
PULL
better energy
efficiency
Advertenties
