Dometic COOLAIR RTX1000 Montagehandleiding pagina 12
Montageset voor man tgx xxl
Verberg thumbnails
Zie ook voor COOLAIR RTX1000:
- Montagehandleiding (208 pagina's) ,
- Gebruiksaanwijzing (344 pagina's) ,
- Montagehandleiding (248 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
Configuring the system software
6.8
Fixing the surround
A
NOTICE!
Tighten the screws carefully in order not to damage the surround.
➤ Fix the surround in place as illustrated (fig. b).
7
Configuring the system software
Before the system is first put into operation, the control unit settings can be
adjusted to suit the various installation conditions. Those adjustments must be
made by the installer.
Display
indication
P.01
P.02
I
NOTE
Configuration mode can still be activated if the low voltage cut-out has
switched off the system and only residual voltage is available.
7.1
Entering and exiting configuration mode
➤ Press and hold the
➤ Press and hold the
✓ The display shows the symbol
✓ The parking cooler switches to configuration mode.
✓ The display shows "P.01" and the symbol
➤ Scroll through the menu by pressing the
desired menu item.
➤ Press the
➤ Press and hold the
12
Parameter
Meaning
Low voltage
The battery monitor shuts down the
shut-down
system at the voltage defined here.
Unit for tempera-
The temperature can be displayed in
ture display
°C or °F.
button.
button for longer than 3 s.
button to open the desired menu item.
button for longer than 3 s to exit configuration mode.
CoolAir RTX1000, RTX2000
.
flashes.
or
button to select the
Factory
setting
22.8 V
°C
EN
Advertenties
