Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
sufficient ventilation is always guaranteed (don't place the device on shelves or
where curtains or furniture block the ventilation holes, and ensure that there are at
least 10 cm of space on all sides);
the device isn't placed on a thick carpet or bed during operation, no direct heat
sources (i.e. radiators) influence the device;
no direct sunlight reaches the device;
contact with splashing or dripping water must be avoided (don't place any items
filled with liquids, i.e. vases, onto or next to the device);
the device doesn't stand near magnetic fields (i.e. speakers);
no foreign objects or dust penetrate the housing;
candles and other open flames must be kept away from this product at all times to
prevent the spread of fire
Securely placing or mounting the outdoor sensor
Place the sensor in a location where it is protected from the weather, for example
under an awning or carport. The sensor has an IPX4 rating and is therefore
protected from water splashes. Use the included screws and anchors for wall
mounting. Make sure that:
the sensor hangs or stands upright;
sufficient ventilation is always guaranteed (don't place the device on shelves or
where curtains or furniture block the ventilation holes, and ensure that there are at
least 10 cm of space on all sides);
no direct sunlight reaches the device;
the device doesn't stand near magnetic fields (i.e. speakers);
no foreign objects or dust penetrate the housing;
sensitive surfaces are protected before placement.
Setup
Insert batteries into the outdoor sensor 40 first and then
insert batteries into the weather station 34.
Remove the protective film from the weather station and the outdoor sensor. Open
the battery compartment of the outdoor sensor 40 and insert the included
batteries in the correct polarity. The LED indicator 44 will briefly light up
and the display will show the temperature. Close the battery compartment.
Open the battery compartment of the weather station 34 and insert the included
batteries in the correct polarity. Close the battery compartment. The weather symbol
6 6 6 6 blinks and the weather station receives the signal from the outdoor sensor. This
process may take several minutes to complete. During this time the signal 3 of the
outdoor sensor will blink. If reception is successful, the selected channel 30 and the
current outdoor temperature 2 will appear. After successful reception of the signal for
the outdoor sensor, the reception of the DCF77 time signal will begin and the radio
control indicator 26
will blink on the display next to the time. This process can take
from 3-10 minutes. All buttons except the LIGHT/SNOOZE-button 5 are disabled
during the reception process. If reception fails after 10 minutes, the radio tower 26
will disappear. Please set the time manually (Basic settings). The weather station will
reattempt reception at 04:00 and 05:00 o'clock and, if reception is successful, will
correct the set time.
! Note: Please do not move the weather station or the sensor during the reception
process.
If the reception attempt is successful, the radio tower 26
permanently on the display and the correct time, date, day of the week
and the times of sunrise, sunset, moonrise and moonset will be set automatically.
DST will appear on the display next to the radio control indicator 26
daylight saving time.
Time zone adjustment
If you are in a country, in which the clock displays the wrong time even though it can
receive the DCF77 time signal, please use the time zone adjustment to use your
weather station in a time zone other than the standard time zone (UTC+1 = Central
European Time). Set the difference in hours (- 01 for example) to the desired time
zone.
will appear
during
- 5 -
Advertenties
Hoofdstukken
Inhoudsopgave
