Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Sunny
Slightly
cloudy
Cloudy
Barometer
Your weather station can show the air pressure tendency 4.
Air pressure rising
Air pressure constant
Air pressure falling
You can also select absolute or relative air pressure 28 by pressing the +/AIR
PRESSURE-button 21. Rel. or Abs. will appear on the display.
Note: The weather station measures the absolute air pressure. Your local weather
service can supply you with the relative air pressure for your location, which you
can input into the weather station.
To change the relative air pressure, press and hold the +/AIR PRESSURE-button 21
for 3 seconds. The air pressure value will blink on the display and can be set by
pressing the - MAX/MIN-button 19 or the +/AIR PRESSURE-button 21. Confirm
your setting by pressing the MODE-button 22.
Press the MODE-button 22 1 x long and 1 x short, set hPa or inHg by pressing -
MAX/MIN-button 19 or the +/AIR PRESSURE-button 21 to display hectopascal
(hPa) or inches of mercury (inHg).
12-hour air pressure history
Press the HISTORY/WEATHER-button 18 to view the air pressure history for the last
12 hours.
0 – HR = current air pressure
- 1 HR = air pressure 1 hour ago
-2 HR = air pressure 2 hours ago... and so on
Outdoor sensor/channel setting
You can use the weather station with up to 3 outdoor sensors at the same time.
Open the battery compartment of the outdoor sensor 40 and select a channel (1-3)
by using the Channel selection switch 39. Press and hold the CHANNEL-button 16
for 3 seconds or until an audible signal sounds. The weather station will now attempt
to receive the signal 3.
Now press the TX-button 37 to manually transmit the temperature from the outdoor
sensor to the weather station.
Close the battery compartment. Press the °C/°F-button 36 to select °C-Celsius or
°F-Fahrenheit.
Note: The outdoor sensor must be within a maximum distance of
100 m of the weather station with no obstructions.
If you are using mutliple outdoor sensors: Press the CHANNEL-button 16 to select
the reception channel.
The rotation symbol
on the display at 30 indicates that the weather station is
rotating through channels 1-3.
Only active outdoor sensors are displayed. Press and hold the CHANNEL-button 16
to remove unused channels. When adding an additional outdoor sensor, the
Downpour
Rain
Heavy
snowfall
Snow
- 9 -
Advertenties
Hoofdstukken
Inhoudsopgave
