OPERATION
You can always turn on the Bridge function manually.
In order to activate the Bridge function touch sensor of the cooking zone
simultaneously touch two sensors of the cooking zones
The rear cooking zone display will show " ", while the front cooking zone display
will show "0". The desired heat setting is selected by sliding your finger across the
setting selection sensor field
In order to deactivate the Bridge function touch and hold sensor of the cooking
zone
with symbol „ " for 3 seconds. The respective cooking zone displays will
show "0".
Now both cooking zones can be controlled independently.
Check if cookware is suitable for a cooking zone
You can check if your cookware is suitable for a cooking zone to achieve maxi-
mum efficiency and use the full power of the cooking zone.
Test procedure:
•
Pour a little water into your cookware and place it in the middle of the cooking
zone.
•
Turn on the hob.
•
When cookware is detected, simultaneously touch and hold for 3 seconds
the detected cooking zone selector and then
beep
•
The
and
progress.
•
After the test (max. 20 seconds) the display will show a result ranging from 00
to 99.
•
The hob will turn off automatically.
Do not move the cookware during the test.
The result of 99 indicates that cookware is ideal for use on a cooking zone.
The result displayed is indicative only and depends on cookware base diameter,
material and how it is built.
You can use cookware when the result is 60 or more. If the cookware base
diameter is less than that of the cooking zone and the result is below 60, repeat
the test on a smaller available cooking zone. If you use cookware with test result
below 60, cooking will take longer and will be less efficient.
Test result of 00 means that cookware is not suitable for use with an induction
hob.
All manuals and user guides at all-guides.com
.
symbols will alternate on the display indicating that test is in
touch sensor until you hear a
28
and then
on the left or right side.