Switching On The Appliance; Switching On The Cooking Zones; Selecting The Cooking Zone Heat Setting - Amica KMI Series Gebruikershandleiding

Verberg thumbnails Zie ook voor KMI Series:

Advertenties

Beschikbare talen

OPERATION

Control Panel

● Immediately after the appliance is connected to electrical mains, all displays will light up

briefly. Your induction hob is then ready for use.

● The induction hob is equipped with electronic touch control sensor fields, which are

operated by touching with a finger for at least 1 second.

● Touching of a sensor field is accompanied by an acoustic signal to acknowledge.

No objects should be placed on the sensor fields (this could cause an error).

Touch sensor fields should be always kept clean.

Switching on the appliance

To switch on the appliance touch and hold the on/off sensor field (1) for at least 1 second. All

displays (3) will show the number „0".

If none of the sensor fields is touched within 20 seconds, the appliance switches

itself off.

Once the appliance is switched on using the on/off sensor field (1), select a cooking zone (5)

within the next 20 seconds.

1. When a cooking zone selection sensor field (5) is touched, „0" on the corresponding heat

setting indicator display will become bright.

2. Set the desired heat setting using the „+" (2) or „-" (4) sensor fields.

If none of the sensor fields is touched within 20 seconds of switching on the

appliance, the cooking zone switches off.

A cooking zone is active when its display shows a digit or a letter. This indicates the

cooking zone is ready for the heat setting to be set or changed.

When the cooking zone display (3) shows bright "0", start setting the desired heat setting

using the „+" (2) or „-" (4) sensor field.

All manuals and user guides at all-guides.com

Inhoudsopgave

Advertenties

Pg series