Amica KMI Series Gebruikershandleiding pagina 11
Verberg thumbnails
Zie ook voor KMI Series:
- Gebruikershandleiding (68 pagina's) ,
- Gebruikershandleiding (76 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Installation of self-adhesive foam gasket
Do not install the appliance without the foam gasket.
The gasket must be applied on the appliance as follows:
Before fitting the appliance in the kitchen worktop, apply self-adhesive foam gasket
provided underneath the rim.
- before applying, remove the protective film from the self-adhesive foam gasket
- apply the self-adhesive foam gasket underneath the appliance rim
(Figure)
Installing KMI* hob - bracket
•
Use four "A" brackets for 38 mm thick worktops. Fit the hob into worktop opening as shown
on figure 3 and 4. To properly secure hob in 28 mm thick worktop, use four 15x15x50 mm
wooden blocks in addition to "A" brackets. Fit the hob into worktop opening as shown on
figure 5 and 6.
•
Check if adhesive seal is properly applied to the hob's flange. Loosely attach fixing brackets
to the bottom of the hob
•
Remove dust from the worktop, insert hob into the opening and press in firmly,
•
Position fixing brackets perpendicularly to the hob's edge and tighten firmly.
All manuals and user guides at all-guides.com
11
Advertenties
Hoofdstukken
