Advertenties
Beschikbare talen
Beschikbare talen
5. Drain plug
7. Main lid
9. Detachable base
11. Stainless steel telescopic tube 12. HEPA washable filter
13. Sponge filter
15. Air outlet filter cover
17. Plastic hose
19. Aluminum nozzle for ash
21. Upholstery brush
23. Adapter for construction tools 24. Wet and dry floor brush (industrial)
25. Wet and dry floor brush (home) 26. Paper bag 25 liters
27. Construction gasket
Installation method - Photo C
1. Push the 4 casters (10) into the holes in the base (9).
2. Insert the plastic hose (17) into the suction port (3) and turn it clockwise.
3. Insert the plastic hose holder (17) into the telescopic tube (11).
4. Press the button on the telescopic tube to extend it.
5. Insert the telescopic tube into the brush (24 or 25) or other accessories (21 or 22 or 23 or 16).
6. There are 2 covers in the main cover (7) to choose from for installation:
a. Dry and wet cleaning function: Attach the dust cover (15) on the back of the main cover (7) to filter out escaping particles.
b. Blower function: Before starting the blower, attach the blower cover (14) to the back of the main cover (7) and insert the plastic
hose (17) into it. The blower helps clean up fallen leaves in the garden or helps clear dust from hard-to-reach corners.
7. Pull out the drain plug (5) to pour out liquid wet waste.
OPERATION
Before operating this unit, make sure that the appropriate filters are properly installed according to the desired purposes.
Set the switch (1) to position "I" to turn on the unit, move the switch (1) to position "0" to turn off the unit. The "II" position is used
only when another electric construction tool: for example, a wall grinder has been connected to the vacuum cleaner.
When the stainless steel container (4) or paper bag (26) is full, we recommend emptying and cleaning the container and replacing
the bag, the filters should also be cleaned.
Function 1: Cleaning cars / upholstered furniture
Install the HEPA filter (12) under the main cover (7) and place the construction seal (27) on the wound of the stainless steel
container (4). Dust will be collected directly into the stainless steel container (4). Use one of the accessories for this function:
crevice nozzle (16), sofa brush (21) or round horsehair brush (22) and plastic hose (17).
Function 2: Cleaning construction dust - 2 alternative methods are available:
(a) Install a HEPA filter (12) and a fire-resistant cotton filter (20) under the main lid (7). Dust will be collected directly into the
stainless steel container (4).
(b) Under the main cover (7), install the HEPA filter (12) and fire-resistant cotton filter (20), and attach the paper bag (26) to the part
of the suction spigot inside the stainless steel container (4). This will collect the dust into the paper bag for convenient disposal,
reducing the amount of dust particles in the air.
A wet and dry floor brush (24) and a stainless steel telescopic tube (11) with a plastic hose (17) are recommended for this function.
Function 3: Vacuuming large spaces - 2 alternative methods are available:
(a) Install a HEPA filter (12) and a fire-resistant cotton filter (20) under the main lid (7). Dust will be collected directly into the
stainless steel container (4).
(b) Under the main cover (7), install the HEPA filter (12) and construction seal (27) on the wound of the stainless steel container (4),
and attach the paper bag (26) to the part of the suction spigot inside the stainless steel container (4). This will collect the dust into
the paper bag for convenient disposal, reducing the amount of dust particles in the air.
For this function, it is recommended to use a wet and dry floor brush and a stainless steel telescopic tube (11) with a plastic hose
6. Lifting handle
8. Metal clip
10. Wheel
14. Blower hood
16. Crevice cap
18. Metal hose for ash
20. Flame retardant cotton filter
22. Horsehair round brush
7
Advertenties
