Advertenties
Beschikbare talen
Beschikbare talen
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONNECTIONS
1. FILTER SWITCH: In passive mode, a single amplifier can
be used to power all drivers inside the loudspeaker. The
full frequency range is put into the loudspeaker and the
loudspeakers' internal crossover separates the
frequencies, delivering the right frequencies to the right
driver. In the example of a 2-way passive loudspeaker, this
means that the single amplifier is powering both the HF
compression driver and the LF transducer. The internal
crossover takes care of both the frequency and power
separation.
In bi-amp mode, two power amplifiers can be used.
This gives you the advantage of being able to
select the best power amplifier specifications for
each driver inside the loudspeaker. In a bi-amp
configuration, an external crossover is used to
separate the frequencies and this splits the signal
to the dedicated LF amplifier and the HF amplifier.
This way, each amplifier is only working on the
given frequency range and, in turn, is powering the
corresponding driver inside the loudspeaker.
2. INPUT: Receive the signal coming from an external
amplifier.
(PASSIVE +1/-1 connected; +2 -2 not connected)
(BI-AMP +1/-1 LF, +2-2 HF)
3. OUTPUT: Direct link for connecting a second speaker in
parallel.
(PASSIVE +1-1 connected; +2 -2 not connected)
(BI-AMP +1/-1 LF, +2-2 HF)
3
Advertenties
