Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Set the rotary switch (5) to the desired position:
– Position 1:
– Position 2:
– Position 3:
– Position 4:
– PULSE position:
The lid (1) consists of two pieces. You can remove the insert in the centre of
the lid to add ingredients during operation.
10. To turn the device off, set the rotary switch (5) back to the AUS (Off) position.
Remove the power plug from the socket.
11. You can now remove your smoothie via the tap (7): Pull the tap forwards to open it
and pull it back again to close it.
12. Turn the blending container (2) counter-clockwise until you feel resistance and
remove the container from the motor unit (4).
Cleaning and storage
ATTENTION!
■
Always set the rotary switch to the AUS (Off) position and pull the mains plug out of
the socket before cleaning!
■
Never submerge the motor unit in water or other liquids! Ensure that the motor unit,
cable or plug can not fall in water or are at risk of getting wet.
■
Clean the device and the accessories thoroughly with warm water and a small
amount of mild detergent immediately after each use to prevent the build-up of
germs. Do not allow any residual food to dry onto it.
■
The motor unit is not suitable for cleaning in a dishwasher!
■
When cleaning, do not use any scouring or abrasive cleaners! They could damage
the surface.
•
Unscrew the tap from the mixing container by turning it anticlockwise and clean the
mixing container, the tap and the lid including all inserts with clear, warm water and
a little mild detergent or in the dishwasher.
•
Wipe off the motor unit with a damp cloth and dry it thoroughly afterwards.
•
Allow all parts to dry completely before reassembling and/or stowing the device.
Store the device in a clean, dry area that is not accessible to children.
All manuals and user guides at all-guides.com
15
The device will continuously work with
speed setting 1 ("slow").
The device will continuously work with
speed setting 2 ("middle").
The device will continuously work with
speed setting 3 ("fast").
The device will continuously work with
speed setting 4 ("very fast").
The device will work in pulse mode.
The rotary switch must be held.
EN
Advertenties
Hoofdstukken
Inhoudsopgave
