Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction
of black arrow and raised when you
turn in the opposite direction. Taking
help from someone to slightly lift the
refrigerator will facilitate this process.
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call your
AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in
a safe and comfortable way.The lamps
used in this appliance have to withstand
extreme physical conditions such as
temperatures below -20 °C.
(only chest and upright freezer)
Installation (Under the
counter)
Internal height of the counter should
be 820mm.
(!) Cookers or other heat sources
must not be placed above the
counter where the appliance is
installed under the counter.
The mains wall socket plug must be
close to the right or left hand side of
the appliance.
Remove the top cover of the
appliance. There are 4 screws(2
pieces at the back, 2 pieces below
the front edge) that should be
removed. Fig. 1
Cut the part shown in the picture and
then remove it by the help of pliers.
Place you appliance under the
counter and adjust the front feets until
its top touches to the counter.
In order to use the product under the
counter, the distance between the
wall and the reference indicated in
the top connection plastic must be
minimum 595 mm.
Fig. 2-3
Fix the appliance under the counter
by using 2 of the screws that was
removed from the top cover.(Material
of the counter must be plastics or
wood based!)
Fig. 4
13
EN
Advertenties
Hoofdstukken
Inhoudsopgave
