Inhoudsopgave
Advertenties
OPERATION
Detecting pan on the cooking zone
Each induction cooking zone is equipped with pan detector. It activates and interrupts heating
automatically when a pan is placed / replaced from the zone. This saves energy.
Heating temperature is displayed if a suitable pan is used.
Induction cooking suitable pans are those with flat, magnetic base. See table for detailed
information.
Heating power digit will blink in the display if there is no pan in place on a cooking zone, or
the pan is unsuitable. The cooking zone will not activate. The cooking zone will switch off
automatically if no suitable pan is placed on the cooking zone within 1 minute.
It is not recommended to switch off cooking zones under normal conditions by taking the pan
off it. Use the respective knobs to switch off cooking zones.
Note:
Please note that all the settings will be cancelled if there is a power cut. Exercise care when
the power is restored. The residual heat indicator ('H') will appear in the display as long as
the cooking zones are hot.
Switch off the cooking zones after you have finished using the heating panel. Do not rely on
the indications of the pan detector.
19
Advertenties
Hoofdstukken
Inhoudsopgave
