Advertenties
Beschikbare talen
Beschikbare talen
EN
SETTING FLASH EXPOSURE COMPENSATION
Turn the setting dial
opposite the Index LED
If you want to have uncompensated fl ash exposures you have to
reset the compensation value to
Tip:
– Dark subjects against a bright background:
positive compensation value
– Bright subjects against a dark background
negative compensation value
40
so that the desired compensation value is
9
9a
.
0
Notes:
• The description above applies only to cameras that do not allow
such settings themselves. With other cameras, the fl ash
exposure compensation must be set on the camera. Read the
camera's instructions for this.
In the latter case, fl ash exposure compensation settings on the
fl ash unit are ineff ective.
• It is not possible to alter the fl ash exposure by changing the lens
aperture since the camera's automatic exposure control treats
the changed aperture as a normal working aperture again.
• When setting a compensation value, the fl ash range changes
according to the following pattern:
Positive compensation value = lower range
Negative compensation value = higher range
Also see the guide number table in the Appendix.
VIDEO LIGHT -
Ever more cameras are fi tted with a video recording function. As an
alternative to the fl ash function, this fl ash unit therefore off ers an
integrated video light
2
.
• The status LED
lights up as an indication that the light
9d
brightness can be controlled.
Setting the light brightness
Turn the setting dial
so that the desired output level is opposite
9
the Status LED
.
9a
With Lithium batteries, the lighting time at maximum brightness
(i.e. with setting at
) is approx. 3.5 hours.
1
Advertenties
