Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.
Room Output
The control room output is normally connected to
the monitoring system in the control room and
carries the stereo mix or, when selected, the solo
signals.
10. Main Out put
The 6.3mm (¼") jacks deliver the mixer's stereo
output. You use these jacks, for example, to
connect to the power amplifier driving your main
speakers.
11. Phantom +48V
This switch toggles phantom power on and off.
When the switch is on the mixer supplies +48V
phantom power to all channels that have XLR input
jacks. Turn this switch on when using one or more
phantom-powered condenser microphones.
12. Effect Display
Show the kind of DSP-effect.
13. Program Dial
You can select the effect preset by turning the
program control. The display flashes with the
number of the current preset. To recall the selected
preset, press on the button; the flashing stops.
14. Stereo Aux Return
The stereo aux return jacks generally serve as the
return for the effects mix (created using the post-
fader aux sends) by connecting the output of an
external effects device. If only the left jack is
connected, the aux return is automatically switched
to mono.
15. Repeat Control
Adjusts the parameter (depth, speed, etc.) for the
selected effect.
16. Headphone Level
Use this control to adjust the output level of headphone.
17. MP3 EQ
Two-band equalizer adjusts the high and low frequency of MP3 player.
18. USB Port
Connect your USB device to this port to play music with MP3-format.
19. MP3 Display
Show the MP3 time, song name and other play instruction.
20. MP3 switch
STOP: Press shortly to stop playing. Press for seconds for recording, also press 2 seconds to stop recording.
PREV / NEXT: Turning the program control.
PLAY: Press the program control knob.
21. VU Meter
Power indicator: This indicator lights when the mixer power is on.
48V indicator: The red +48v LED lights up when phantom power is switched on. Phantom power is required to operate
condenser microphones.
NOTE: The "0" segment corresponds to the nominal output level. The peak indicator lights up red when the output
reaches the clipping level.
22. FX Fader
Control effect input signal level.
23. MP3 Fader
Control the volume of MP3.
24. Main Mix Fader
Control the output level of the main mix.
25. BT-Function
Contact mobile phone or tablet.
Connecting: Press the "CONTACT SWITCH" for
two seconds, then the signal LED light up, use your
mobile phone
or tablet and choose "MIXER-01" BT-connection.
26. Headphone
6.3mm (¼") output jack for connecting a
headphone.
4
Advertenties
Inhoudsopgave
