Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Alarm
Normal use of the refrigerator may give
rise to various disruptions with
unstable refrigerator function as a
consequence. These disruptions are
shown on the display by means of an
alarm code (an E followed by a
number), and an acoustic signal is
given.
In case of several faults, the alarm
codes will be displayed in turn.
Alarm codes
E1 - Temperature sensor fault
E3 - Evaporator sensor fault
E4 - Open door
E5 - Temperature too high
E6 - Temperature too high at power
failure
E1 and E3
One of the temperature sensors has
been damaged. Call service. A built-in
emergency program maintains an
acceptable temperature until the fault
is corrected.
E4
The refrigerator door is open for more
than 2 minutes. The alarm code
disappears when the door is closed. If
the door is opened and closed
repeatedly within a short space of time,
the interior light will eventually switch
off.
All manuals and user guides at all-guides.com
E5
The temperature in the refrigerator has
been higher than the set temperature
for more than 2 hours.
E6
There has been a power failure, the
power supply to the refrigerator has
been disconnected or the temperature
in the refrigerator has been higher than
the set temperature for more than 2
hours.
Interrupting an alarm
The acoustic alarm can always be
interrupted by opening the door and
pressing any button.
An alarm code will be displayed even
though the reason for the alarm no
longer exists. To remove the alarm
code press button
(7) simultaneously for 2 to 3 seconds.
An acoustic alarm cannot then be
given for the next 2 hours.
9
GB
8 8 8 8 8
9 9 9 9 9
(6) and
Advertenties
Hoofdstukken
Inhoudsopgave
