Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Preventing material damage
2 Preventing material
damage
Preventing material damage
ATTENTION!
Using the base, runners or appliance
doors as a seat surface or climbing
surface may damage the appliance.
Do not stand or support yourself
▶
on the base, runners or doors.
Contamination with oil or fat may
cause plastic parts and door seals to
become porous.
Keep plastic parts and door seals
▶
free of oil and grease.
Environmental protection and saving energy
3 Environmental protec-
tion and saving energy
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
3.2 Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
¡ Keep the appliance out of direct
sunlight.
¡ Install the appliance as far away as
possible from heating elements,
cookers and other heat sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 300 cm clearance to
oil or solid-fuel cookers.
1
Depending on the appliance specifications
Preventing material damage en
¡ Use a niche depth of 560 mm.
¡ Never cover or block the exterior
ventilation grilles.
Saving energy during use
Note: The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
¡ Open the appliance only briefly.
¡ Never cover or block the interior
ventilation openings or the exterior
ventilation grilles.
¡ Transport purchased food in a
cool bag and place in the appli-
ance quickly.
¡ Allow warm food and drinks to
cool down before storing them.
¡ Always leave some space between
the food and to the back panel.
¡ Pack the food airtight.
¡ Open the freezer compartment
door only briefly and then close it
properly.
Installation and connection
4 Installation and con-
nection
You can find out where and how best
Installation and connection
to install your appliance here. You
will also learn how to connect your
appliance to the power supply.
4.1 Scope of delivery
After unpacking all parts, check for
any transport damage and for com-
pleteness of delivery.
If you have any complaints, contact
your dealer or our after-sales service
→ Page 25.
The delivery consists of the following:
¡ Built-in appliance
¡ Equipment and accessories
¡ Installation material
1
11
Advertenties
Hoofdstukken
Inhoudsopgave
