Advertenties
Beschikbare talen
Beschikbare talen
B
Using the appliance
• Select a heat setting by touching the slider control
- If you don't choose a heat setting within 1 minute, the Induction hob will automatically switch
off. You will need to start again at step 1.
- You can modify the heat setting at any time during cooking.
power up
power down
If the display flashes
alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display "
"will automatically disappear after 1 minute if no suitable pan is placed on it.
Finish cooking
• Touching the heating zone selection control that you wish to switch off.
• Turn the cooking zone off by touching the slider to "|". Make sure the displayshows"0"
26
EN
Advertenties
