Advertenties
Beschikbare talen
Beschikbare talen
B
WARNING
There are ventilation holes around outside of the hob. YOU
MUST ensure these holes are not blocked by the worktop
when you put the hob into position.
WARNING
• Be aware that the glue that join the plastic or wooden
material to the furniture, has to resist to temperature not
below 150°C, to avoid the unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must
therefore be able to withstand an temperature of 90°C.
Before installing the hob, make sure that
• The work surface is square and level, and no structural members interfere with space
requirements.
• The work surface is made of a heat-resistant and insulated material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
• The installation will comply with all clearance requirements and applicable standards and
regulations.
• A suitable isolating switch providing full disconnection from the mains power supply is
incorporated in the permanent wiring, mounted and positioned to comply with the local wiring
rules and regulations.
Using the appliance
Max. 5mm
16
Min. 50mm
24
Max. 5mm
EN
Advertenties
