Advertenties
Beschikbare talen
Beschikbare talen
Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in a
sturdy packing. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
The tool's plastic components are marked according to their material, which
makes it possible to remove environmental friendly and differentiated because
of available collection facilities.
Noise Emission / Vibration
The indication of noise emission is measured according to DIN 45 635, part 21.
The level of acoustic pressure on the work place could exceed 85 dB (A); in this
case protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60 745.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total
working period.Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Dust Protection
Dust from material such as paint containing lead, some wood species, minerals
and metal may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the operator or bystanders.
Only for EU countries
Do not dispose of electric tools together with household
waste material! In observance of the European Directive
2012/19/EU on waste electrical and electronic equipment
and its implementation in accordance with national law,
electric tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
28
Advertenties
