Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Read this document before
Incorrect installation, adjustment, alteration, repair or maintenance work may lead to
material damage or injury. All work must be carried out by certified, qualified professionals.
If the appliance is not positioned in accordance with the instructions, the warranty shall be
rendered void. This appliance is not intended for use by children or persons with a physical,
sensory or mental handicap, or who lack the required experience or expertise, unless they
are supervised or have been instructed in the use of the appliance by somebody who is
responsible for their safety. Children must be supervised to ensure that they do not play
All rights reserved
The manufacturer has a policy of continuous product improvement and reserves the right to
make changes to the specifications without prior notice. The technical details are considered
correct but do not form the basis for a contract or warranty. All orders are accepted subject
to the standard terms and conditions of sale and delivery (which will be sent to you at your
request). The information in this document is subject to change without notice. The most
recent version of this manual is always available at www.markclimate.com/downloads.
General warnings
Installation must comply with the relevant local and/or national regulations. You must
therefore have the Ecofan P140 installed by a professionally qualified installer in accordance
with all applicable national and international regulations. Faulty installation, adjustment,
alteration, maintenance activity or repair shall render the warranty void.
The Ecofan P140 is supplied with 2 downrod lengths:
- 400 mm fitted, giving 610mm overall height (from ceiling to base of motor body)
- 150mm downrod supplied seperately, giving 360mm overall height (from ceiling to base of
motor body).
1.0 General
1.1 This appliance must be earthed.
1.2 Check that the voltage and frequency on both the fan motor and controller (if fitted)
rating labels correspond with your electrical supply.
1.3 The installation must be provided with a double pole isolator switch having a contact
separation of not less than 3mm and protected with a 5 Amp fuse.
1.4 Ensure that the safety wire is connected to the J-hook bracket before operating the fan.
2
installing the appliance
with the appliance.
Warning
Advertenties
Inhoudsopgave
