Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
36
www.aeg.com
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
applicable).
7. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
How to deactivate the AirDry
Make sure the appliance is in user mode.
1. Press the programme button three
The indicator
2. Wait until the indicator
The indicator
setting:
3. Press the programme button to
4. Press the on/off button to confirm the
(if
7.1 The salt container
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
7.2 How to fill the salt
container
1. Turn the cap of the salt container
2. Put 1 litre of water in the salt
3. Fill the salt container with 1 kg of salt
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
times.
starts to flash.
to flash and the remaining
programme indicators are off.
shows the current
•
is off = AirDry is off.
•
is on = AirDry is on.
change the setting.
setting.
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
counterclockwise and remove it.
container (only for the first time).
(until it is full).
continues
Advertenties
Inhoudsopgave
