Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Control panel
1
On/Off button
2
Delay start button
3
Programme selection / CANCEL button
4
Indicator lights
5
Programme lights
Programme lights A and B
In addition to the selection of the corre-
sponding washing programme, these lights
will also guide you in the following operations:
End
Rinse aid
Salt
Setting mode
Press the On/Off button; if ALL programme
indicator lights are off and the End indicator
light is flashing, the appliance is in setting
mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– deactivating/activating the audible
signals,
the appliance MUST be in setting mode.
1
2
Indicator lights
Comes on when a washing programme has ended. It also has added func-
tions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to malfunction of the appliance.
Comes on when the rinse aid has run out.
Comes on when the special salt has run out.
5
3
A
B
– setting the water softener level,
– deactivating/activating the audible signals.
Press the On/Off button; if a programme in-
dicator light is on with a fixed light, the last
performed or selected programme is still set.
In this case, to return to setting mode the
programme has to be cancelled.
To cancel a set programme or a
programme in progress
Press and hold, for about 3 seconds, the
programme selection/cancel button until the
End indicator light is flashing. The pro-
gramme has been cancelled and the appli-
ance is now in setting mode.
4
25
Advertenties
Hoofdstukken
Inhoudsopgave
