Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION - Using the blender
1. Place the mixing jug (3) onto the connection (12) and turn it sturdily. The blender has a safety system.
Whenever it has not been placed properly onto the motor housing, the blender will not turn on.
2. Cut solid ingredients into pieces.
3. Fill the mixing jug with the solid ingredients. If there are any, add the liquid ingredients (1L max.)
4. Place the lid (2) onto the mixing jug
5. Place the closing plug (1) onto the lid.
6. Put the plug (16) into the socket.
7. Turn the speed switch (15) onto the desired setting. The longer the blender is in use (180 seonds max.),
the finer the ingredients are ground.
8. Turn off the blender (setting 'OFF').
9. Do not remove the jug from the connection until the blades (4) have once again turned completely still.
ATTENTION:
•
Do not use the blender and kitchen machine simultaneously, this overloads the motor.
•
Never remove the mixing jug lid when the blender is still running
TIPS
•
Whenever the blender is in use, you can add ingredients though the refill opening in the anti-splash lid
by removing the closing plug.
•
You can use the appliance at the highest speed for a short while by pressing the 'PULSE' button (13).
The 'PULSE' function only works as long as you keep the button pressed down.
•
Prepare crushed ice by filling the blender jug with ice cubes and repeatedly pressing the 'PULSE' button
until desired consistency of the ice is obtained.
•
Cut meat and other solid ingredients into small pieces before adding them to the blender jug.
•
To prepare tomato juice, cut the tomatoes into four pieces and insert them through the filling opening in
the blender jug's lid while the blender is in operation.
•
If the blender does not operate at the required speed switch off the appliance ('OFF') and:
a. press 'PULSE', or
b. stir the ingredients with a spatula, or
c. remove some of the ingredients in the blender jug.
920100 G20M
42
EN
Advertenties
Inhoudsopgave
