Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5). The programmed time / temperature setting will be restored with the next program entry
in the memory.
6). Once finish setting up the programming mode, the thermostat will work under
programming mode ON even if the thermostat is turned off. The heating device will be
switched ON or OFF according to the programming setting.
13. The thermostat will automatically turn off the heating device if a sudden drop in
temperature in the room is detected.
14. Press FAV, set temperature will convert to favorite temperature, and it will convert again to week
target temperature at the time when TIMER ON start to work.
15. The symbol means heating, it only displays when room temperature is 0.5℃ (or more) lower
than set temperature.
16. The backlight will be ON when press any button in the state of power-on.
Notes
1. All settings need to be re-set after battery replacement.
2. Alkaline battery is recommended. If ALL buttons on the thermostat are
not working, try replacing the batteries.
3. Please do change the batteries with new ones once the screen battery
symbol gets flashing, or else it may result in halted/stuck/not working.
4. Check if set temperature is higher enough than room temperature first
if the heating can not be turned on by thermostat.
5. If users want the week timer and temperature work, make sure the
TIMER function has been switched to ON by long press MODE setting;
If users want it not working, switch the TIMER to OFF.
6. Do not cover or touch the temperature sensor which is at the top
of the thermostat.
7. Do put the thermostat in a open normal room environment rather not
inside a drawer/pocket or under pillow/quilt etc.
8. Please do take out the batteries from the thermostat if long time no use.
Advertenties
Hoofdstukken
Inhoudsopgave
