Download Inhoudsopgave Inhoud Print deze pagina

Quality Heating QH-HH-L Handleiding pagina 25

Infrarood paneel
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

1)
5+2 Programming Mode
You can program the thermostat to fit your lifestyle — week and weekend, plus up to 4 groups
of time interval per day.
Step 1. Once in 5+2 mode, Press and hold the SET button for 3-5 seconds until
Program icon ① and MON TUE WED THU FRI is displayed with ON and Time
Icon flashing on screen.
Step 2. Press ▲ button to adjust hour(+1hour/press) and press ▼ to adjust
Minute(+5minutes/press) to set the starting time of Program ①.
Step 3. Press the SET button once and OFF icon flashing on screen, Use ▲
Button to adjust hour(+1hour/press) and press ▼ to adjust minute
(+5minutes/press) to set the ending time of Program ①.
Step 4. Press the SET button once again and set temperature icon flashing on
screen, Use ▲ or▼ button to set the desired temperature to be maintained
for program ①.
Step 5. Press the SET button to bring up Program ② of week days , repeat
Step 2-5. And users can set up Program ③ and ④ in similar manner.
Step 6. After finishing setting Program ④, press the SET button to bring up
SAT and SUN setting, repeat step 2-5 to set Program① ② ③ ④ of
weekends.
2)
1-7 Programming Mode
You can program the thermostat everyday with setting 2 groups of time interval per day.
Once in 1-7 Mode, Press and hold the SET button for 3-5 seconds until Program icon ① and
MON is displayed with ON and Time icon flashing on screen, users can follow the above step
2-4 to set On/Off time and desired temperature of Program ① and ② from Monday to
Sunday in sequence.
Tips
1). The default starting time is 00:00, the ending time is 00:00, and the default operating
temperature is 15 degrees.
2). If the user does not adjust the default On/Off time of 00:00, the programming settings is
invalid.
3). Running time of Program ① ② ③ ④ should not be overlapped, and the ending time
value of each program must be later than the starting time, otherwise setting is invalid.
4). In 5+2 mode, if you do not want to set a mid-day heating period(Program ② or ③ ),
simply set the programs ② or ③ to a lower temperature than default with very short
intervals. An example is shown below.
11

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Hh0606lHh1006lHh1206l

Inhoudsopgave