WARRANTY AND AFTER-SALE SERVICES
Warranty
Warranty service as stated on the warranty card
The manufacturer shall not be held liable for any damage caused by improper use of the product.
CHANGING THE DIRECTION OF THE DOOR OPENING (FIG. 20)
The following instructions apply to appliances with one or two cooling chambers. There are no middle
hinges in appliances with one cooling chamber.
-
Before reversing the door opening direction, unplug the appliance and remove all food.
-
Remove the stoppers masking hinge mounting holes (Fig. 1, 2)
-
With the door closed unscrew the hinges (Fig. 3, 5, 7, 8)
-
While holding the appliance door, tilt the hinges (Fig. 4). Be especially careful during this step, as the
hinge may close and cause injury.
-
Remove the door (Fig. 6, 9)
-
Remove the hinges from the appliance body (Fig. 10)
-
Screw in the hinges on the other side of the appliance (Fig. 11, 12, 13)
-
Install door following the instructions in reverse order.
-
Make sure the door is properly aligned relative to the body of the appliance (Figure 14).
25