Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Turn the operating mode and temperature selector back to
1.
the Û position.
Press the KJ clock function button to exit the clock function.
2.
End of operation
Automatic switch-off at a set time.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJclock function button repeatedly until the KJ
2.
and y symbols light up.
Set the end of operation using the rotary selector
3.
(e.g. ‚ƒ:„‹ o'clock).
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
Turn the operating mode and temperature selector back to
1.
the Û position.
Press the KJ clock function button to exit the clock function.
2.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJclock function button repeatedly until
2.
the KJand x symbols light up.
Baking
Do not use shelf height 2 when baking with the 3 2D-Hot air
operating mode. The air circulation would be impaired and this
will have a negative effect on your baking.
Baking accessories
Baking tins
Use dark-coloured metal baking tins. Tinplate and glass dishes
increase the baking time required and the cake will not brown
evenly. If you wish to bake using tinplate tins and % Top/
bottom heat, you should use shelf height 1.
Always place a loaf tin diagonally and a round baking tin in the
centre of the wire rack.
Set the cooking time with the rotary selector
3.
(e.g. ‚:„‹ hours).
The setting is applied automatically.
Press the KJclock function button repeatedly until
4.
the KJand y symbols light up.
Set the end of operation using the rotary selector
5.
(e.g. ‚ƒ:„‹ o'clock).
The appliance switches off and waits until the appropriate
time to switch on (‚‚:‹‹ in the example). The appliance
switches off automatically at the time set for the end of
operation (‚ƒ:„‹ ).
Turn the operating mode and temperature selector back to
6.
the Û position.
Press the KJ clock function button to exit the clock function.
7.
Setting the clock
You can only change the clock when no other clock function is
active.
Press the KJ clock function button repeatedly until
1.
the KJand 3 symbols light up.
Set the clock using the rotary selector.
2.
The setting is applied automatically.
Checking, correcting or deleting settings
To check your settings, press the KJ clock function button
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
Baking trays
We recommend that you only use original baking trays, as
these have been optimally designed for the cooking
compartment and the operating modes.
Always carefully push the baking trays in as far as they will go.
Make sure that the sloping edge of the baking tray is facing the
appliance door.
Note: Do not place food directly onto the aluminium baking
tray. Line the aluminium baking tray with greaseproof paper.
Baking on two levels
When baking on two levels, you should preferably use baking
trays and put them in at the same time.
Bear in mind that your items may brown at different rates on
each level. The items on the top level will brown most quickly
and can be taken out earlier.
61
Advertenties
Hoofdstukken
Inhoudsopgave
