Advertenties
Beschikbare talen
Beschikbare talen
CONTROLS
Appliance controls
The control panel is shown in Figure 10. For your reference, it is also
shown below:
Buttons
1. Hi Humidity: High humidity mode
2. ON / OFF: turn the appliance on / off
3.
: increase the chamber temperature
4.
: lower the chamber temperature
Display:
1. Temperature
2. High humidity indicator
Control Panel
•
Turn your appliance on for the first time — all indicators light up for
3 seconds and a you will hear a beep. The default chamber temper-
ature is 5°C.
•
Display during normal operation: Temperature display area — in case
of fault, error codes will be displayed here in order of priority. The set
temperature is displayed during normal operation.
•
Control Panel:
1. If the control panel is not used or the door is not opened, the back-
light will turn off after approximately 30 seconds.
2. When you open the door, the display backlight will be on and go out
about 30 seconds after the door is closed.
3. If the appliance develops a fault that is assigned an error code, the
display will flash once and go out after about 30 seconds (if the alarm
beep sounds for a long time, press any button to mute the alarm
tone);
- 17 -
Advertenties
