ULTIMATE SPEED ULGD 10 A1 Vertaling Van De Originele Bedieningshandleiding pagina 21
Verberg thumbnails
Zie ook voor ULGD 10 A1:
- Vertaling van de originele bedieningshandleiding (102 pagina's) ,
- Vertaling van de originele bedieningshandleiding (57 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
If the 24 V battery is deeply dis-
charged (below 15.6 Volt), then the
charger recognises the battery as a
12 V battery. In this case, the
program selector button
pressed seven times, to select
program 7.
The
24V
and
2
are shown on the display. During
the charging process, the charging
display
flashes. The progress of
9
the charging process (1-4 bars) will
be shown on the status display
When the battery is fully charged,
the status display shows
The flashing stops and the device
switches to trickle charging automat-
ically. The display will show "FUL".
Program 8
24V
2
(29.4 V / 5.0 A)
To charge 24 V batteries with a
capacity of 40 Ah to 100 Ah under
cold conditions or to charge AGM
batteries.
To maintain the charge of 24 V
batteries up to 150 Ah.
Press the program selector button
four times to select Program 8.
If the 24 V battery is deeply dis-
charged (below 15.6 Volt), then the
charger recognises the battery as a
12 V battery. In this case, the
must be
8
symbols
5
2
.
10
4 bars.
10
8
program selector button
be pressed eight times, to select
program 8.
The
24V
,
2
2
symbols are shown on the display.
During the charging process, the
charging display
progress of the charging process
(1-4 bars) will be shown on the
status display
10
is fully charged, the status display
shows
4 bars. The flashing stops
10
and the device switches
to trickle charging automatically.
The display will show "FUL".
Program 9
12V
(13.6 V / 3.0 A)
Supply program 13.6 V / 3 A max.
Press the program selector button
nine times to select Program 9.
The
12V
and
3
shown on the display.
For use as a 12 V voltage supply
or for buffer maintenance charg-
ing, where 100% battery power is
necessary. Das supply program will
work without a time limit.
Please contact the vehicle manu-
facturer and read the operating
GB/IE/NI
must
8
and
5
6
flashes. The
9
. When the battery
symbols are
7
21
8
Advertenties
