Download Print deze pagina

ULTIMATE SPEED ULGD 10 A1 Vertaling Van De Originele Bedieningshandleiding pagina 20

Advertenties

Beschikbare talen

Beschikbare talen

Program 5
24V
1
(28.8 V / 2.5 A)
To charge 24 V batteries with a
capacity of 20 Ah to 50 Ah.
Press the program selector button
once to select Program 5.
If the 24 V battery is deeply dis-
charged (below 15.6 Volt), then the
charger recognises the battery as
a 12 V battery. In this case, the
program selector button
pressed five times, to select pro-
gram 5.
The
24V
and
2
shown on the display. During the
charging process, the charging
display
flashes. The progress of
9
the charging process (1-4 bars) will
be shown on the status display
When the battery is fully charged,
the status display shows
The flashing stops and the device
switches to trickle charging
automatically. The display will
show "FUL".
Program 6
24V
1
(29.4 V / 2.5 A)
To charge 24 V batteries with a
capacity of 20 Ah to 50 Ah under
20
GB/IE/NI
must be
8
symbols are
4
1
.
10
4 bars.
10
cold conditions or to charge AGM
batteries.
Press the program selector button
twice to select Program 6.
If the 24 V battery is deeply dis-
charged (below 15.6 Volt), then the
charger recognises the battery as a
12 V battery. In this case, the
8
program selector button
pressed six times, to select pro-
gram 6.
The
24V
2
symbols are shown on the display.
During the charging process, the
charging display
progress of the charging process
(1-4 bars) will be shown on the
status display
is fully charged, the status display
shows
4 bars. The flashing stops
10
and the device switches to trickle
charging automatically.
The display will show "FUL".
Program 7
24V
2
(28.8 V / 5.0 A)
To charge 24 V batteries with a
capacity of 40 Ah to 100 Ah.
To maintain the charge of 24 V
batteries up to 150 Ah.
Press the program selector button
three times to select Program 7.
must be
8
,
and
4
1
flashes. The
9
. When the battery
10
8
6
8

Advertenties

loading