Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Error codes
Below is an explanation of error codes that can appear on the display. These error codes can only be solved by
qualified personnel. Please contact customer service to have the problem fixed.
ERRORCODE
BESCHRIJVING
E1
- The fridge temperature sensor gives an error message / is faulty.
E2
- The freezer temperature sensor gives an error message / is faulty.
E3
- Fout temperatuursensor van vlees & vis zone
E5
- The circuit for the freezer defrost detection gives an error message / is faulty.
E6
- Communication error
E7
- The ambient temperature sensor gives an error message / is faulty.
7. TAKING OUT OF SERVICE
Switching off and storage
•
If the appliance will not be used for several months, first switch it off and then pull the plug out of the socket.
•
Make sure the appliance is completely thawed.
•
Clean the inside thoroughly and wipe dry. To prevent the formation of odours and moulds, leave the door open:
block it.
•
Clean the door gasket groove with soap and water and wipe everything dry with a soft cloth.
•
Do not use a hard brush, steel brush, detergent, soap powder, alkaline detergent, benzene, gasoline, acids, hot
water or other corrosive or soluble substances to clean the appliance.
•
Store the cleaned appliance in a dry, ventilated place, away from a heat source. Make sure the appliance is on
a level surface and do not place heavy objects on top.
•
The appliance in storage must not be accessible to children playing.
49
Advertenties
Hoofdstukken
Inhoudsopgave
