Advertenties
NC-foutmeldingen | Lijst met NC-foutmeldingen
Foutnummer
1A1-0053
1A1-0054
1A2-000A
1A2-000B
HEIDENHAIN | TNC7 | TNCguide | 01/2022
Beschrijving
Error message
Gereedschapsinstelling kan niet worden berekend
Cause of error
The orientation of the indexable insert of the turning tool is
not permissible.
Error correction
The plane of the indexable insert must be parallel or perpen-
dicular to the tool spindle:
- Check the tool data
- Check the kinematics configuration, particularly the trans-
formations (CfgKinSimpleTrans) between the tool spindle
and tool
- Contact your machine tool builder
Error message
Gereedschapsinstelling kan niet worden berekend
Cause of error
Incorrect orientation of the selected rotary axes. Possible
causes:
- The turning spindle is parallel to the selected tilting axis
- The tool direction is parallel to the selected tilting axis
- The programmed inclination is not possible with the
present device
Error correction
- Check the programmed inclination
- Use M138 to select a different tilting axis
- Check the kinematics configuration
- Check the configuration of the tool spindle, particularly
CfgAxisPropKin/rotAxisForKinCalc
- Contact your machine tool builder
Error message
Systeemfout in de berekening van de transformatie:
%1
Cause of error
Staat in de fout tekst direct aangegeven.
Error correction
- Benader de servicedienst van de leverancier.
Error message
As in PRESET commando meerdere keren geprogrammeerd
Cause of error
U heeft in het PRESET commando de zelfde as meerdere
keren geprogrammeerd.
Error correction
- Wijzig het NC programma of de cyclus.
41
2371
Advertenties
