Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7
Dateq ONYX Manual
Stereo Line channels (3, 4 en 5)
Use these channels to connect stereo sources. Each channel is equipped with
A / B output selection, input selection (Line 1 and Line 2) and a pre-listening
function.
A / B
Line 1/ Line 2
Cue
Fader
Stereo Line channel with jukebox input (6)
This channel can be used for a stereo source which can suppress channels 2-5 if the jukebox input is
active. The channel has A / B output selection, input selection (Line 1 and Line 2) and a pre-listening
function.
Cue-function
When the Cue button on any of the channels 1-6 is pressed it is possible to monitor the incoming
signal on that channel on the headphones (pre-fader listening). With the meter, it is also possible to
read off the signal level at the selected input. The Cue buttons of output A and B can be used to
monitor the signal at this output on the headphones (after-fader listening) and to read it off on the LED
meter (what you see is what you hear).
If no Cue buttons have been pressed there will be no signal at all on the headphones.
Output selection. When button A is pressed the signal of this
channel is directed to output A. When talkover is active on
output A the signal of this channel is attenuated. When button B
is pressed the signal of this channel is directed to output B.
When talkover is active on output B the signal of this channel is
attenuated.
Input selection. Normally Line 1 is selected. Press the button to
select the Line 2 input.
Switches the pre-listening function on and off. When this button
is pressed the signal of this channel is audible on the
headphones and visible on the LED VU meter.
60 mm fader which can be used to control the volume of this
channel.
A / B
Output selection. When button A is pressed the signal of this
channel is directed to output A. When talkover is active on
output A the signal of this channel is attenuated. When the
jukebox input is active the signal of any of the channels 2-5 on
which button A has also been pressed is suppressed.
When button B is pressed the signal of this channel is directed
to output B. When talkover is active on output B the signal of
this channel is attenuated. When the jukebox input is active
the signal of any of the channels 2-5 on which button B has
also been pressed is suppressed. For more information on the
jukebox input, see the description on page 5.
Line 1/ Line 2
Input selection. Normally Line 1 is selected. Press the button
to select the Line 2 input.
Cue
Switches the pre-listening function on and off. When this
button is pressed the signal of this channel is audible on the
phones and visible on the LED VU meter.
Fader
60 mm fader which can be used to control the volume of this
channel.
Operation
EN
Advertenties
Inhoudsopgave
