Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3
Before using the device
This chapter contains information about
the delivery status.
3.1 Delivery status
The device is shipped as standard as
follows:
Brush & Cut (completely installed)
1 x user manual and product inform a -
tion
1 x allen key
3.2 Elements of the device
A
Adjustable safety guard
B
Lock button
C
Brush
D
Disk
E
Guiding wheel (constituent part of
the MultiBrush device)
F
Locking device (2 x left/right) (con-
stituent part of the MultiBrush devi-
ce)
G
Motor/gear device
(constituent part of the MultiBrush
device)
A
B
C
D
F
G
F
E
17
4
Technical Data
Brush & Cut
max. rotational speed: 1800 min
Dimensions
ø disk:
ø brush:
Brush width:
Device weight:
5
Installing the "Brush & Cut
unit"
Figures 1 - 5
CAUTION! RISK OF BURNS
CAUSED BY HOT PARTS!
During assembly or conversion work
the drive parts of the device or com-
ponents can still be very hot and
may cause burns.
It is therefore important to observe
the following safety instructions:
Wear protective gloves during
assembly!
WARNING! RISK OF DEATH
DUE TO ELECTRIC SHOCK!
Switch off the MultiBrush device and
remove the device plug from the
mains power socket.
Your MultiBrush device is installed as
1
shown, for example. Open the inter-
lock (K)
of the guide arm (M) as
shown in the illustration.
With the lock applied (K) remove the
2
guide arm (M) and then the surface
brush (N).
Now open the locking device (K)
3
of the drive arm (P), as shown in the
illustration and remove, with the lock
applied, (K) the drive arm (P) with
safety guard (O).
-1
150 mm
100 mm
50 mm
approx. 0,6 kg
Advertenties
Hoofdstukken
Inhoudsopgave
