Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Unfolding the pram
Open the locking mechanism on the left side of the pram (2). Pull up the handle until the frame automatically locks with
an audible click (3).
Attention
4. Installation of the rear suspension
To install the rear suspension, push the bar with the brake system onto the chassis until you hear a click on both sides
of the chassis (4).
5. Installation and disassembly of the rear wheels
Press the button on the central part of the wheel (5) to unlock the rear wheels and remove them from the axle (6). To
reassemble, push the button down and slide the wheels onto the axle until they are locked.
pram check if all wheels are mounted correctly.
6. Installation of the frontal rotating wheels
Push the front wheels with their wheel anchor (7) in their intended place on the frame until they automatically lock with an
audible click (8). Make sure the wheels are properly anchored. The front wheels are equipped with a locking mechanism
for driving straight on. To do this, turn the ring of the mechanism outwards (9).
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
CROOZ 51-516-xx
: before using the pram check whether it has been correctly unfolded.
T
0032 9 380 80 95
28
Attention
:
before using the
www.quax.eu - E
E
info@quax.eu
Advertenties
Inhoudsopgave
