Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Deactivate cooking zones
● A given cooking zone must be active. Heat setting display pulsates.
● To switch off a cooking zone touch the on/off sensor field or touch the sensor (3) for 3
seconds. Slide your finger across the heat selection sensor field (2) to reduce the heat
setting to "0"
Switch off the appliance
● The appliance operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If a cooking zone is still hot, the relevant display (3) will show the letter "H" to indicate residual
heat.
Booster function "P"
The Booster Function increases the nominal power of the 220x190 mm cooking zone from
2200W to 3500W, Bridge from 3600W to 5500W.
In order to activate the Booster function, select the cooking zone and then using sensor (6)
set the heat setting to "P". The letter "P" will be shown on the display (3).
To switch off the Booster function, touch the heat setting selection sensor field (2) and reduce
the heat setting, or lift the pot from the cooking zone.
For 220x190 cooking zone, operation of the Booster function is limited to 10
minutes. Once the Booster function is automatically deactivated, the cooking
zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated.
When the pot is lifted from the cooking zone when the Booster function is in
operation, it remains active and the countdown continues.
When the appliance electronic circuits or induction coils overheat when the
Booster function is in operation, it is automatically deactivated. The cooking
zone continues to operate at its nominal power.
21
Advertenties
Hoofdstukken
Inhoudsopgave
