Advertenties
Beschikbare talen
Beschikbare talen
Group adjustment
The "GROUP SELECT" icon is used to adjust the transmitter frequency group.
1.
In the main menu, press the "SET" button to the "GROUP SELECT" icon.
2.
When the "GROUP SELECT" icon is displayed, press the "UP" button to increase the group number or "DOWN" button
3.
to decrease the group number. When the "UP"/"DOWN" button is pressed steadily, the group number will be increased
/ decreased in a fast manner until the button is released.
Once the desired frequency group is reached, press the "SET" button to save and go to the next menu, if have to any
4.
operation in 5 seconds, the receiver will exit to the main status. If press the "POWER" button to exit
to the main status without save.
5.
Channel adjustment
The "CHANNEL SELECT" icon is used to adjust the transmitter frequency channel.
1.
In the main menu, press the "SET" button to the "CHANNEL SELECT" icon.
2.
When the "CHANNEL SELECT" icon is displayed, press the "UP" button to increase the channel number or "DOWN"
3.
button to decrease the channel number. When the "UP"/"DOWN" button is pressed longer time, the channel number
will be increased / decreased in a fast manner until the button is released.
Once the desired frequency channel is reached, press the "SET" button to save and go to the next menu, if have no
4.
any operation in 5 seconds, the receiver will exit to the main status. If press the "POWER" button to exit to the main
status without saving.
Audio Mode adjustment
The "MODE SELECT" icon is used to adjust the transmitter audio inputs mode.
1.
In the main menu, press the "SET" button to the "MODE SELECT" icon.
2.
When the "MODE SELECT" icon is displayed, press the "UP" button to select "STEREO" mode and "DOWN" button to
3.
select "MONO" mode.
Once the desired frequency group is reached, press the "SET" button to save and go to the next menu, if have no any
4.
operation in 5 seconds, the receiver will exit to the main status. If press the "POWER" button to exit to the main status
without save.
Power Mode Adjustment
The "POWER SELECT" icon is used to adjust the transmitter radiated power.
1.
In the main menu, press the "SET" button to the "POWER SELECT" icon.
2.
When the "POWER SELECT" icon is displayed, press the "UP" button to select "H" mode for higher radiant power and
3.
"DOWN" button to select "L" mode for lower radiant power.
Once the desired frequency group is reached, press the "SET" button to save and go to the next menu, if have no any
4.
operation in 5 seconds, the receiver will exit to the main status. If press the "POWER" button to exit to the main status
without save.
5
Advertenties
