Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2
appliance description
1.
Speed control
2.
On button
3.
Turbo button
4.
Motor part
5.
Blender shaft
3
before first use
Before using the appliance for the first time, please do as
follows: carefully unpack the appliance and remove all the
packaging material.
Warming: the blade of the blender
shaft is extremely sharp. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation.
Rinse the blender shaft with warm soapy water and dry it
thoroughly.
Wipe the motor part and the connector with a damp cloth.
Do not use any abrasive detergents. These can damage the
housing.
Always roll out the cord completely. Make sure that all the parts
are dry before you use the appliance.
10
•
English
5
4
using the stick mixer
Warning: the blade of the blender shaft is extremely
sharp.
• Take the motor part and the blender shaft.
Attach the blender shaft to the motor part by
turning the blender shaft clockwise. To loosen
it, turn the blender shaft the other way.
• Check whether the speed control is set on the
lowest speed - to the right.
• Plug in the appliance.
• Lower the stick mixer into the food.
• Press the TURBO button for maximum speed
or press the ON button to use the speed
setting you can set on top of the motor part.
• As soon as you release the button (on or
turbo), the stick mixer will stop.
• When you have finished mixing or blending
and released the button, wait until the knives
have stopped turning, before approaching the
blender shaft with your hands.
The SPEED CONTROL is adjustable. By sliding the knob from
right to left, the speed increases.
lowest speed = knob to the right
fastest speed = knob to the left
1
2
3
4
Advertenties
Inhoudsopgave
