Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
cleaNINg
Removing the oven windows
1
Replacing the oven light bulb
EN 16
• Use the reverse order to assemble the door. Insert the door at an
angle of 15° in the hinges on the front of the appliance and push
the door forwards and downwards so that the hinges slide into their
notches. Check to be sure the hinge notches are properly in place.
• Then open the door fully and turn the pawls back to their initial
position. Close the door slowly and check that it closes properly.
If the door does not open or close properly, make sure the hinge
notches are positioned correctly in the hinge holders.
The oven windows can be removed from the oven door to clean them
better.
• Push in the small pawls at the top left and right (1).
• Remove the top edge from the oven door.
• Remove the oven windows
1
Please note!
Disconnect the appliance from the mains by removing the plug from the
socket before the changing the light.
• Remove the glass light cover by carefully clicking it loose with a
screwdriver.
• Replace the oven light bulb.
• Put the glass cover back on. Make sure it catches properly in the
holder.
Install a light bulb suitable for 300º C temperatures.
Advertenties
Hoofdstukken
Inhoudsopgave
